Products

Power Control Center (PCC) Panel

PCC Panels are the most essential part of electrical system of an industry from where the power of the industry is controlled.


PCC Panel is a power distribution board to control the Electrical power supplied to HT Panels, MCC panels and transformers who play vital role in all electrical control system.


Power Control Centre is used for distribution and control of various power source used in industry. Normally Power Control Centers is installed near power source hence fault level is high.


Various protections viz short circuit, overload, earth fault, under voltage etc. are provided to protect source and equipment. PCC Panels widely used in refineries, chemical plants, pharmaceuticals and Solar Industries.

Motor Control Center (MCC) Panel

The Motor Control Center are used in industrial and commercial applications for connecting the individual motors for manually, remotely or automatically starting, stopping selecting forward and reverse rotation, selecting and regulating the speed, regulating and limiting the torque and protecting against overload, single phasing, phase imbalance, earth fault, under current, under / over voltage, lock rotor current, high winding temperature etc.


The motor control centers consist of following:

  • One or more vertical metal cabinet sections with common power bus, motor control unites with provision of individual connections and metering instruments.
  • Circuit Breakers, Starters, Protection Devices, Controllers Etc.

Automatic Power Factor Correction (APFC) Panel

Reactive Power compensation system is designed to work automatically on LT power supply to measure, display & connect, disconnect the required capacitor banks through Thyristor /Capacitor Duty contactor with protection of MCB / HRC Fuses & series reactors to each bank to achieve the set Target power factor.


Thyristor /Contactor Switched Automatic power factor system is the highly accurate, properly designed system with required creep age distance as per required standards. APFC System equipped with advanced, Digital Microprocessor based relay to measure, calculate and display all electrical network parameters.


It accurately measures cycle to cycle reactive power requirement for required capacitors are connected to switching element / device installed in the system, so as required capacitors are connected / disconnected to the network. APFC Controllers close loop fast response multi method switching [MMS] algorithm helps system to have close & precise control on power factor.

Features:

  • Modular Structure
  • Protection to each step.
  • Well ventilated design.
  • Powder coated metallic frame structure design
  • Four modes of operation.
  • Door interlocks Facility.
  • Good Service Backup.

Application:

  • Automobile Industries, Cement Industries, Metal Industries.
  • Chemical & Fertilizer Plant, Pharmaceutical Industries.
  • Hospitals, Malls, Banks, IT Parks, Commercial Complexes.
  • Windmill, Power Stations, DG Stations, Crushers.
  • Railway / MES / Ordinance Workshops

Synchronizing and Auto Load Sharing Panel

Variety of Synchronizing and Auto Load Sharing Control Panels.


Synchronization and Automatic Load Sharing between multiple Power sources/lines like Mains, Grid, Generators.


Microprocessor based Controller with a high degree of customization, which can be configured to meet the Clients requirements.

Automatic Mains Failure (AMF) Panel

Auto Mains Failure Panels are used to control start/stop of diesel generator sets in accordance with the availability of main power supply. The panels are manufactured for various ratings and different generator sets. These panels are incorporated with battery chargers, various protections for diesel engines and alternators.

AMF Control System provides:

  • Consistent Power supply to the load in absence of mains supply.
  • DG set protections.
  • Smooth Start/Stop sequence.
  • Audio Visual indications of various fault conditions
  • Auto/ Manual modes of operations
  • Main Failure and voltage fluctuations detections
  • User friendly

Power Factor Control (PFC) Panel

We are a leading manufacturer of power distribution panel (also known as panelboard, breaker panel, or electric panel) which is a component of an electricity supply system that divides an electrical power feed into subsidiary circuits while providing a protective fuse or circuit breaker for each circuit in a common enclosure. Our valuable clients can avail an extensive range of PDP Panel from us. Manufactured utilizing best quality raw material, this range of products is in line with the international quality standards & parameters. Widely known for its superior performance, energy efficiency, sturdiness and longer functional life, this range is highly applauded by our clients all across the nation. Moreover, in order to ensure defect free products, our highly skilled quality controllers check this range on various quality parameters.

DG Set Control Panel

Keeping in mind the ever-evolving requirements of our precious clients, we are offering an exclusive range of DG Set Control Panel Offered panel is manufactured using premium quality components and ultra-modern technology. Provided panel is appreciated for its long functional life and easy handling feature. This panel is precisely checked by our quality controllers to assure its premium quality. Moreover, this panel is available in various specifications and at affordable prices.

Power Distribution Panel

Power Distribution is a system, consisting of a Main Distribution Board (MDB), Sub Main Distribution Boards (SMDBs) and Final Distribution Boards, by which the electrical energy is transmitted via branches to reach the exact end user.

Key features of Distribution Boards:

  • Ample cabling space for easy connections
  • Top and bottom cable entry.
  • Panels for front or rear access to suit application
  • Index of protection: IP 31 & IP 54
  • Floor mounting
  • Maximum safety & reliability
  • Modular system with Customized design to meet end user requirements.

Low Tension Control Panel

There are various uses of LT Control Panel as per the user requirement, the main being as Control Center or Feeder or Distribution Board.


LT Power Panel receives the main power supply Either from Generator or Transformer and distributes the same to various electrical devices and distribution boards.


With the help of protective switch gears, they are used for controlling and monitoring the main power supply from a centralized location.


There is various application of LT Control Panel. Some of them are listed as:

  • Medium to High Capacity Manufacturing Industry
  • Hospitals
  • Educational Institutions
  • Commercial Complexes
  • Hotels

DG Synchronization Panel

Diesel Generator synchronization is the process of matching technical electrical parameters such as voltage, frequency, phase angle, phase sequence, and waveform of Diesel generator with a healthy or running power system. This is required to be done just before the generator is reconnected to the power system. Keeping in mind the ever-evolving requirements of our precious clients, we are offering an exclusive range of DG Sync Panel. Offered panel is manufactured using premium quality components and ultra-modern technology. Provided panel is appreciated for its long functional life and easy handling feature. This panel is precisely checked by our quality controllers to assure its premium quality. Moreover, this panel is available in various specifications and at affordable prices.

PLC Control Panel

Programmable logic controller (PLC) control panels or also known as PLC Automation Panel are one of the most important and efficient kinds of control panels. Which are generally used in variety of electronic and electrical circuit fittings.


PLC Control Panels we manufacture are highly capable of giving higher output at less power consumption. Integrated with solid PLC logic and flawless PLC hardware programming.


Ease in modification of logic, reduced size, means of remote communications and advances in the technology have made PLC Automation Control Panels an edge over conventional relay-based systems. Our Engineers has provided PLC based Panels from Various PLC.


From small I/O application to the complex I/O systems are provided by the conceptial control Engineers. conceptial control Engineers have developed communication software's for remote communication of the PLC Panels in various different protocols.


With PLC based Panels HMI/MMI are provided to provide the operator various messages and controls of the process plants touch screen MMI are provided. To effective control of the system.

Fire Hydrant Control Panel

This Panel with DOL, STAR-DELTA, ATS, SOFT STARTER, VFD starters.


Provision of Main Pump, Jockey Pump, Sprinkler Pump, Booster Pump, Engine Driven Pump.


Automation with Pressure switch.


Facilities of different control voltage with control transformer control Bus.


With type-2 co-ordination wherever required.

VFD Based Control Panel

Electrical VFD control panels are designed to control the speed of electric motor and feed pump. They are widely used in drilling, pumping and other large machine applications. The VFD panels are widely used in tube mills, paper mills, extruder plants, rolling Mills, cable industry and CTL Lines. They are even installed in hospitals, business houses and other public places. VFD control panel are designed to match variable speed requirements of a process unit and so are vigorously tested on various speed parameters.


Roughly 50% of the total electrical energy generated in the world is consumed by rotating equipment. Variable frequency drive technology offers a cost-effective method to match motor speed to load demands and represents a state-of-the-art opportunity to reduce operating costs and improve overall productivity. VFD Cabinets are custom made to your specifications for your application.

DOL Starter panel

Direct on-Line start is probably the simplest and traditional type of start and it is to connect the motor directly to the power supply performing therefore a full-voltage start-up.It is often abbreviated with the acronym DOL.


DOL (Direct on Line) start is the simplest and most cost-effective system for starting pumps and motors and it is traditionally the most widely used. The induced current is the rotor is high. This results on a peak current on the network which can be 5 to 8 times the nominal current.


They are suitable for startup of small submersible pumps, deep well pumps or booster sets with surface pumps. DOL control panels need a direct connection to the power supply network, which implies:

  • Start at full voltage and constant frequency
  • High starting torque
  • Very short acceleration times.

Auto Change Over panel

We design, engineer and manufacture Automatic as well as Manual Changeover Panels for Mains and standby generator power supply applications as well as for applications having dual power supply. These panels use circuit breakers or motorized changeover switches to power your infrastructure during a mains failure.


We supply changeover systems from 20A for the smallest backup systems to 2000A ACB-based synchronizing panels for much larger installations. Our panels are designed, built and installed to the highest standard, as standalone products or as part of your complete design and installation package.

The features include:

  • Epoxy powder coating for corrosion protection.
  • Long working life.
  • Low maintenance cost.
  • Easy to Operate.

Bus Duct

Bus duct is used for the effective and efficient supply of electricity in mostly industrial locations. Copper or aluminum is used for the conductor of bus duct that be insulated and enclosed completely for protection against mechanical damage and dust accumulation.


A bus duct system is an effective method of distributing power to your switchgear and various loads. However, bus duct problems can lead to catastrophic damage and extensive downtime. Allow for the space requirements and weight of the bus duct.


You may need to change other components or select a different style of bus duct for your installation. If you are installing bus duct outside, select a housing type that sheds rainwater - rather than pooling it on top of the housing. If you are going to install any part of the bus duct outdoors, use factory-installed pre-wired space heaters with integral thermostats to prevent condensation problems.

Cable Tray

We are a leading manufacturer of Feeder Pillar Panels which are used for the distribution of power supply, the Feeder Pillar Panels are breaker panels which are the very first set of switching devices at the secondary side of the transformer. A feeder pillar panel is a source for controlling and monitoring electricity supply in residential or commercial buildings throughout a region. In a nutshell, the feeder pillar panels are the power source of electricity and storehouse to convert the power supplied from the main source to low voltage electricity for domestic or commercial use!

Fire Alarm Control Panel (FAC Panel)

The panel receives information from devices designed to detect and reports fires, monitors their operational integrity and provides for automatics control of equipment, and transmission of information necessary to prepare the facility for fire based on a predetermined sequence.


At conceptial control, we offer a range of individual or combined of Fire Fighting Control Panel - Fire Alarm Control Panel (FAC Panel). Our product comes with standard features.

Instrumentation Panel

Instrumentation Panels are useful to monitor and control process parameters like temperature, pressure, flow etc.


Input signal from the sensors is connected to the panels through isolation or compensating cables.


The output from the panel is connected to the final control element for controlling the process value. Various interlocks and safety audio visual alarms are provided through Alarm Annunciators or PLC's. Total process simulation can be shown on.

Lighting Distribution Board (LDB Panel)

A Lighting Distribution Board (LDB Panel) is comprised of a free-standing enclosure, a bus bar system, MCCB's, metering and support equipment’s and required current transformers.


Panels are assembled in a systematic manner such as incomer section and outgoing section.


A MDB is comprised of a free-standing enclosure, a bus bar system, MCCB's, metering and support equipment’s and required current transformers.

Key features of Lighting Distribution Board:

  • Index of protection: IP 31 & IP 54
  • Ample cabling space for easy connections
  • Panels for front or rear access to suit application
  • Top and bottom cable entry.
  • Floor mounting
  • Modular system with Customized design to meet end user requirements.
  • Maximum safety & reliability

Mimic and Desk Panel

Mimic & Annunciator panels are being used in the industry for many years to display process status and alarms. In Mimic Panels, the process is pictorially represented on the front side of a Control desk / Panel.


Generally, mimic displays are printed on polyester or polycarbonate sheets and provided with an acrylic front sheet for protection. LEDs and other Indicators can be fitted on the display for Process Indication.


At CSE Solutions, we supply conventional and mosaic mimics and annunciator panels with MS powder coating, stainless steel enclosures furnished with the internal wiring of Mimic LEDs and Annunciator Windows. We have an in-house team of designers to design the Mimic Display as per our client’s process layout.

Our Range:

  • Mosaic Desk
  • Addressable Fire Alarm Mimic Display
  • Security Desk Mimic
  • Fire Alarm Mimic Panel

Keep in Touch

  • 35, Vishala-111 Estate, B/H Grand Vishala Estate, Odhav, Ahmedabad - 382415
  • +91 8511413838

Information

About Conceptial Control

Conceptial Control is engaged in manufacturing and supplying of a wide range of Electrical and Instrument Control Panels, which is widely used across different industries for a variety of applications.


We endlessly endeavor to offer superior quality electrical control systems and automation products and services to ensure maximum client satisfaction.

2024 © All Rights Reserved by Conceptial Control